2″ Inch Pneumatic Single Acting Air Actuated Angle Seat Valve NC

WIC Valve AVS series air actuated angle seat single acting spring return pneumatic valve use pressurized air to open the piston valve and close the valve with the build in springs inside the air actuator. This industrial air operated valve is used to control the on and off of the valve for media such as air, gas, liquid, water and steam.  The characteristic of the air actuated piston angle seat valve is that valve can be operated at very high temperature, high viscosity medium, and is less sensitive to dirt particles and debris.

The advantage of AVS Series air operated angle seat valve gives a highly efficient flow rate, it can be operated from zero differential pressure (vaccum) and mounted in any position.  With the fluid entry below the seat, AVS series valve can reduce the water hammering.  It features with a easy to see optical position indicator on the top of the actuator, when supply air to the valve, valve is opened and the pin pops up.

 

AVS Series Pneumatic Air Actuated Angle Seat Valve Specifications:

Model Number: AVS-2-T

Valve Type: 2 Way Normally Closed

Service Media: Air, Gas, Liquid, Water, Steam, Oil, Vacuum

Operation Model: Air Actuated Single Acting (Spring Return)

Actuator Operating Pressure: 100 PSI

Actuator Operating Pressure Range: 65 – 120 PSI

Body Material: 316 Stainless Steel / CF8M

Actuator Material: CF8

Seal Material: Teflon (PTFE)

Seat Material: Teflon (PTFE)

Controlling Medium: Inert Air, Air

Operating Pressure: Vacuum to 240 PSI

Maximum Viscosity: 600 mm²/s (600 Centistokes)

Media Temperature: -20 to 180 °C (-5 to 350 °F)

Ambient Temperature: -20 to 60 °C (-5 to 140 °F)

Installation Orientation: Any Position

Port Size: 2″ NPT Female Port Standard

Installation Hardware: 1 Piece Tube OD 1/4″ X Thread 1/8″ Male Straight Connector and 1 Piece of Brass Silencer Included

 

AVS Series Pneumatic Air Actuated Angle Seat Valve Components

AVS Series Pneumatic Air Operated Angle Piston Seat Valve Dimensions (Unit=mm)

Model	Actuator	C (NPT)	Orifice	Cv	E	R	P1	P2	D	A	B	T
AVS-1/2-T	50	1/2″	13	4.7	62	33.5	G1/8″	G1/8″	126	68	133	11
AVS-3/4-T	50	3/4″	18	9.5	62	33.5	G1/8″	G1/8″	131	75	137	14
AVS-1-T	63	1″	24	18.1	76	42	G1/8″	G1/8″	165	90	174	15
AVS-1 1/4-T	63	1-1/4″	31	23.1	76	42	G1/8″	G1/8″	175	15	188	17.5
AVS-1 1/2-T	80	1-1/2″	35	32.9	76	42	G1/8″	G1/8″	178	115	190	17.5
AVS-2-T	80	2″	45	52.8	96	50	G1/8″	G1/8″	195	135	205	20