1/2″ Inch High Pressure Brass Electric Solenoid Steam Valve NC

$120.65

Description

1/2″ Inch High Pressure Brass Electric Solenoid Steam Process Valve Telfon PTFE Seal Normally Closed 

 

WIC Valve 2BCL Series 2-way normally closed electric solenoid steam valve is to control On/Off of air, inert gas, liquid, hot water and steam. This brass electric solenoid steam valve has one 1/2″ inch NPT inlet and one 1/2″ inch NPT outlet port. Valve stays close when the coil is de-energized, and it opens when energized. 2BCL Series solenoid valve is a high pressure pilot piston solenoid valve, it requires a minimum of 7 PSI to operate.  2BCL Series solenoid valve comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constantly energized.  To ensure optimum flow performance, valve should be mounted in vertical position with the coil vertical and inlet/outlet ports horizontal.

 

2BCL Series Brass Electric Solenoid Steam Process Valve Specification:

Model Number: 2BCL-1/2-D

Valve Type: 2 Way Normally Closed (Valve opens with energized)

Service Media: Air, Gas, Liquid, Hot Water, Steam

Operation Model: Pilot Piston

Flow Model: Uni-Directional

Body Material: Brass

Seal Material: Teflon (PTFE)

Armature Tube Material: Stainless Steel

Coil Power: DC: 30-40W, AC: 35VA

Coil Class: H Class IP 65

Coil Duty: 100% ED (Continuous Duty)

Operating Pressure: 7 to 230 PSI

Operating Temperature: -5 to 180°C or 23 to 356 °F

Port Size: 1/2″ Inch NPT Female Port

Coil Voltage Option: 12V DC, 24V DC, 24V AC, 110V AC, 220V AC

Voltage Tolerances: DC: +10% –5% ; AC: +10% -15%

Electrical Connection: DIN 43650A Connector with LED Indicator

 

2BCL Series Brass Electric Solenoid Steam Valve Dimensions (Unit=mm):


Model  Port (NPT) Flow Rate (Cv) Orifice Size  A B C D
2BCL-1/2-D 1/2″ 4.8 17 69 42 146 82
2BCL-3/4-D 3/4″ 4.8 17 69 42 146 82
2BCL-1-D 1″ 12 20 69 52 162 90
2BCL-1 1/4-D 1-1/4″ 24 22 69 74 185 110
2BCL-1 1/2-D 1-1/2″ 29 22 69 74 185 110
2BCL-2-D 2″ 48 48 69 86 195 120

 

2BCL Series Steam High Pressure Electric Solenoid Valve Component Drawing: 

 

Valve Frequently Asked Questions:

 

What is IP65?

Ingress Protection (IP) ratings are developed by the European Committee for Electro Technical Standardization (CENELEC) (NEMA IEC 60529 Degrees of Protection Provided by Enclosures – IP Code), specifying the environmental protection the enclosure provides.

The IP rating normally has two (or three) numbers:

1) Protection from solid objects or materials

2) Protection from liquids (water)

3) Protection against mechanical impacts (commonly omitted, the third number is not a part of IEC 60529)

IP First number – Protection against solid objects

0 No special protection
1 Protected against solid objects over 50 mm, e.g. accidental touch by persons hands.
2 Protected against solid objects over 12 mm, e.g. persons fingers.
3 Protected against solid objects over 2.5 mm (tools and wires).
4 Protected against solid objects over 1 mm (tools, wires, and small wires).
5 Protected against dust limited ingress (no harmful deposit).
6 Totally protected against dust.

IP Second number – Protection against liquids

0 No protection.
1 Protection against vertically falling drops of water e.g. condensation.
2 Protection against direct sprays of water up to 15o from the vertical.
3 Protected against direct sprays of water up to 60o from the vertical.
4 Protection against water sprayed from all directions – limited ingress permitted.
5 Protected against low pressure jets of water from all directions – limited ingress.
6 Protected against temporary flooding of water, e.g. for use on ship decks – limited ingress permitted.
7 Protected against the effect of immersion between 15 cm and 1 m.
8 Protects against long periods of immersion under pressure.

Additional information

Weight 3.40 lbs
Dimensions 6.00 × 4.00 × 4.00 in
Coil Voltage

12V DC, 24V DC, 24V AC, 110V AC, 220V AC