1/8″ Stainless Direct Acting Zero Differential Solenoid Valve NC
$68.67
WIC Valve 2SCK Series Normally Closed Industrial High Pressure 200 PSI Electric Stainless Solenoid Water Process Valve Comes With a CE certified IP 65 Continuous Duty Coil.
Description
1/8″ Inch Stainless Steel Zero Differential Electric Solenoid Valve Normally Closed
WIC Valve 2SCK Series 2 way normally closed general purpose solenoid valve is to control On/Off of air, inert gas, liquid, and water. This industrial electric solenoid process valve has one 1/8″ inlet and one 1/8″ outlet port. Valve stays close when the coil is de-energized, and it opens when energized. Valve has two holes in the bottom and can be mounted in any position. 2SCK Series solenoid valve comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constantly energized.
2SCK Series Stainless Steel Electric Solenoid Valve Specification:
Valve Type: 2 Way Normally Closed (Valve opens with energized)
Service Media: Air, Gas, Liquid, Vacuum, Water
Operation Model: Direct Acting
Flow Model: Uni-Directional
Flow Rate: 0.23Cv (Fluid Flow)
Response Time: Less than 20 ms
Body Material: Stainless Steel
Seal Material: Viton
Armature Tube Material: Stainless Steel
Plunger & Spring Material: Stainless Steel
Coil Certification: CE Certification
Coil Power: DC – 20W ; AC -50Hz 28VA / 60Hz 25VA
Coil Class: H Class IP 65
Coil Duty: 100% ED (Continuous Duty)
Operating Pressure: 0 to 200 PSI
Operating Temperature: -15 to 120 °C (5 to 248 °F)
Port Size: 1/8″ Inch NPT Female Port
Coil Voltage Option: 12V DC, 24V DC, 24V AC, 110V AC, 220V AC
Voltage Tolerances: DC: +10% –5% ; AC: +10% -15%
Electrical Connection: DIN 43650A Coil Connector with LED Indicator
2SCK Series Stainless Steel Electric Solenoid Valve Dimensions (Unit=mm):
Model | Port (NPT) | Flow Rate (Cv) | Orifice Size (mm) | Length | Width | Height |
2SCK-1/8-D | 1/8″ | 0.23 Cv | 2.5 | 41 | 35.5 | 78 |
DIN 43650A Connector Components:
What is ED 100% Coil Duty?
ED 100% indicates suitability of the coil to operate in “continuous service”, in other words it is good for constantly energized.
What is IP65?
Ingress Protection (IP) ratings are developed by the European Committee for Electro Technical Standardization (CENELEC) (NEMA IEC 60529 Degrees of Protection Provided by Enclosures – IP Code), specifying the environmental protection the enclosure provides.
The IP rating normally has two (or three) numbers:
1) Protection from solid objects or materials
2) Protection from liquids (water)
3) Protection against mechanical impacts (commonly omitted, the third number is not a part of IEC 60529)
IP First number – Protection against solid objects
0 | No special protection |
1 | Protected against solid objects over 50 mm, e.g. accidental touch by persons hands. |
2 | Protected against solid objects over 12 mm, e.g. persons fingers. |
3 | Protected against solid objects over 2.5 mm (tools and wires). |
4 | Protected against solid objects over 1 mm (tools, wires, and small wires). |
5 | Protected against dust limited ingress (no harmful deposit). |
6 | Totally protected against dust. |
IP Second number – Protection against liquids
0 | No protection. |
1 | Protection against vertically falling drops of water e.g. condensation. |
2 | Protection against direct sprays of water up to 15o from the vertical. |
3 | Protected against direct sprays of water up to 60o from the vertical. |
4 | Protection against water sprayed from all directions – limited ingress permitted. |
5 | Protected against low pressure jets of water from all directions – limited ingress. |
6 | Protected against temporary flooding of water, e.g. for use on ship decks – limited ingress permitted. |
7 | Protected against the effect of immersion between 15 cm and 1 m. |
8 | Protects against long periods of immersion under pressure. |
Additional information
Weight | 1 lbs |
---|---|
Dimensions | 4.00 × 3.00 × 2.00 in |
Coil Voltage | 12V DC, 24V DC, 24V AC, 110V AC, 220V AC |