2K Series 110V AC Solenoid Valve Coil Grommet With Lead Wire

$7.99

WIC Valve 2K Series 110V AC Solenoid Valve Coil Class H IP 65 Continuous duty coil.

In stock

SKU: 2K-110VAC-G Category:

Description

WIC Valve 2K Series 110/120V AC Solenoid Valve Coil with Lead Wire

2K Series Solenoid Valve Coil Specification:

Model Number: 2K-110VAC-G

Coil Power: 6.5VA

Coil Class: IP 65 (CE Certification)

Coil Duty: 100% ED (Continuous Duty)

Coil Voltage: 110/120V AC

Electrical Connection: Grommet with Lead Wire

 

WIC Valve 2K Series Coil Dimensions: 

What is IP65?

Ingress Protection (IP) ratings are developed by the European Committee for Electro Technical Standardization (CENELEC) (NEMA IEC 60529 Degrees of Protection Provided by Enclosures – IP Code), specifying the environmental protection the enclosure provides.

The IP rating normally has two (or three) numbers:

1) Protection from solid objects or materials

2) Protection from liquids (water)

3) Protection against mechanical impacts (commonly omitted, the third number is not a part of IEC 60529)

IP First number – Protection against solid objects

0 No special protection
1 Protected against solid objects over 50 mm, e.g. accidental touch by persons hands.
2 Protected against solid objects over 12 mm, e.g. persons fingers.
3 Protected against solid objects over 2.5 mm (tools and wires).
4 Protected against solid objects over 1 mm (tools, wires, and small wires).
5 Protected against dust limited ingress (no harmful deposit).
6 Totally protected against dust.

IP Second number – Protection against liquids

0 No protection.
1 Protection against vertically falling drops of water e.g. condensation.
2 Protection against direct sprays of water up to 15o from the vertical.
3 Protected against direct sprays of water up to 60o from the vertical.
4 Protection against water sprayed from all directions – limited ingress permitted.
5 Protected against low pressure jets of water from all directions – limited ingress.
6 Protected against temporary flooding of water, e.g. for use on ship decks – limited ingress permitted.
7 Protected against the effect of immersion between 15 cm and 1 m.
8 Protects against long periods of immersion under pressure.

 

Additional information

Weight 0.60 lbs
Dimensions 1.00 × 1.00 × 1.00 in