Description
1/4″ Inch Plastic Electric Solenoid Fast Response Process Valve With DIN Connector Normally Closed (Stainless Steel Armature Tube)
WIC Valve 2PCK Series 2-way normally closed fast closing electric solenoid water valve is to control On/Off of air, inert gas, liquid and water. This compact electric process valve has one 1/4″ inch NPT inlet and one 1/4″ inch NPT outlet port. Valve stays close when the coil is de-energized, and it opens when energized. 2PCK Series solenoid valve is a Zero differential valve which can be operated at 0 PSI (Vacuum). 2PCK series compact fast response process valve features with 2 of the M4 size convenient mounting holes and valve can be mounted in any position.
2PCK Series Fast Response Electric Water Solenoid Valve Specification:
Valve Type: 2 Way Normally Closed (Valve opens with energized)
Service Media: Air, Gas, Liquid, Water
Operation Model: Direct Acting
Flow Model: Uni-Directional
Flow Rate: 0.23Cv (Fluid Flow), 22 SCFM at 100 PSI (Air Flow)
Response Time: Less than 20 ms
Body Material: Engineered Nylon Plastic (PA66)
Seal Material: NBR (Buna N)
Armature Tube Material: Stainless Steel
Plunger & Spring Material: Stainless Steel
Coil Certification: CE Certification
Coil Power: DC: 6-6.5W / AC: 6-6.5VA
Coil Class: F Class IP 65 (CE Certification)
Coil Duty: 100% ED (Continuous Duty)
Operating Pressure: 28″” Hg to 115 PSI
Operating Temperature: -5 to 80 °C
Port Size: 1/4″ Inch NPT Female Port
Coil Voltage: 12V DC, 24V DC, 24V AC, 110V AC, 220V AC
Electrical Connection: DIN Connector with LED Indicator
2PCK Serie Plastic Fast Acting Electric Solenoid Valve Dimensions (Unit=mm):
Model | Port (NPT) | Flow Rate (Cv) | Orifice Size | A | B | C |
2PCK-1/8-D | 1/8″ | 0.23 | 2.5 | 41 | 62 | 25 |
2PCK-1/4-D | 1/4″ | 0.23 | 2.5 | 41 | 62 | 25 |
2PCK Series Direct Acting Zero Differential Plastic Solenoid Valve Component Drawing:
Frequently Asked Questions:
Grommet Coil Lead Wire Connections:
To connect DC Coil, connect one of the two wires to Positive and the other wire to Negative.
To connect AC Coil, connect one of the two wires to Hot wire and the other wire to Neutral wire.
Additional information
Weight | 0.50 lbs |
---|---|
Dimensions | 3.00 × 3.00 × 1.50 in |
Coil Voltage | 12V DC, 24V DC, 24V AC, 110V AC, 220V AC |
You may also like…
-
2K Series 220V AC Encapsulated Solenoid Valve Coil DIN
$8.99 Add to cart -
2K Series 24V DC Encapsulated Solenoid Valve Coil DIN Connector
$8.99 Add to cart -
2K Series 12V DC Encapsulated Solenoid Valve Coil DIN Connector
$8.99 Add to cart -
2K Series 110V AC Solenoid Valve Coil DIN Connector
$8.99 Add to cart