High Pressure Normally Closed Pilot Piston Stainless Steel Electric Solenoid Hot Water, Steam Process Valve Teflon PTFE Seal WIC Valve 2SCM Series 1/2" Inch NPT 2 Way 

WIC Valve 2SCM Series 2-way normally closed solenoid process valve is to control On/Off of air, inert gas, liquid, hot water, and steam. This industrial steam solenoid valve has one 1/2" half inch NPT inlet and one 1/2" half inch NPT outlet port. Valve stays close when the coil is de-energized, and it opens when energized. Valve can be mounted in any position.  2SCM Series high pressure pilot piston steam valve requires minimum of 7 PSI to operate and maximum pressure up to 230 PSI.  This steam solenoid valve comes with a ED 100% encapsulated coil which suitable to operate in continuous service for constantly energized.  

2SCM Series Stainless Steel High Pressure Electric Solenoid Steam Valve Specification:

Valve Type: 2 Way Normally Closed (Valve opens with energized)

Service Media: Air, Gas, Liquid, Hot Water, Steam

Operation Model: Pilot Piston

Flow Model: Uni-Directional

Body Material: 304 Stainless Steel

Seal Material: Teflon (PTFE)

Armature Tube Material: Stainless Steel

Spring & Plunger Material: Stainless Steel

Coil Certification: CE Certification

Coil Power: DC -30W ; AC - 50/60Hz 28VA

Coil Class: H Class IP 65

Coil Duty: 100% ED (Continuous Duty)

Operating Pressure: 7 to 230 PSI

Operating Temperature: -20 to 180 °C

Port Size: 1/2" Inch NPT Female Port

Coil Voltage Option: 12V DC, 24V DC, 24V AC, 110V AC, 220V AC

Voltage Tolerances: DC: +10% –5% ; AC: +10% -15%

Electrical Connection: DIN 43650A Connector with LED Indicator

2SCM Series Stainless Steel High Pressure Steam Electric Solenoid Valve Dimensions (Unit=mm):  

2SCM Series Stainless Steel Electric High Pressure Steam Solenoid Valve Component Drawing: