1" Inch PA66 Plastic Electric Solenoid Process Valve Normally Closed 

WIC Valve 2PCG Series 2-way normally closed electric solenoid process valve is to control On/Off of air, inert gas, liquid, water and vacuum. This electric solenoid valve has one 1" inlet and one 1" outlet port. Valve stays close when the coil is de-energized, and it opens when energized.  2PCG Series electric solenoid valve comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constantly energized.  Valve can be mounted in any position.  

2PCG Series One Inch Plastic Electric Solenoid Valve Specification:

Valve Type: 2 Way Normally Closed (Valve opens with energized)

Service Media: Air, Gas, Liquid, Water, Vacuum

Operation Model: Direct Lift Diaphragm

Flow Model: Uni-Directional

Body Material: PA66 Plastic Valve Body

Seal Material: NBR (Buna N) Diaphragm & Plunger Tip

Coil Power: DC -30W ; AC - 50/60Hz 28VA

Coil Class: H Class IP 65

Coil Duty: 100% ED (Continuous Duty)

Operating Pressure: Vacuum 0 PSI to 90 PSI

Operating Temperature: 0 to 50 °C or 32 to 122 °F

Port Size: 1" Inch NPT Female Port

Coil Voltage Option: 12V DC, 24V DC, 24V AC, 110V AC, 220V AC

Low Power Consumption Coil: Upgrade Optional 12V DC - 10W, 24V DC - 7W, 24V AC - 8VA, 110V AC - 8VA, 220V AC - 8VA

Low Power Consumption Coil Inrush Current: 24V DC - 50W, 110V AC - 50/60Hz 85VA, 220V AC - 50/60Hz 154VA

Low Power Coil Certification: CE Certification DC Coil

Voltage Tolerances: DC: +10% –5% ; AC: +10% -15%

Electrical Connection: DIN 43650A Connector with LED Indicator

2PCG Series PA66 Plastic Solenoid Process Valve Dimensions (Unit=mm):

2PCG Series Plastic Electric Solenoid Valve Component Drawing: